STEM Zone 3: Medium Preparation

Calibration Technologists and Technicians

Calibration Technologists and Technicians earn $67,820 nationally at the median. The middle 50% of workers fall between $56,380 and $92,080. Where you land depends on specialization, employer, and experience.

About Calibration Technologists and Technicians

This page sets out what the federal data says about working as a calibration technologists and technicians: what the job pays, how fast it is growing, and what it takes to get in. Most people arrive through a degree in Electromechanical Technologies/Technicians and what it leads to, though it is not the only route.

Execute or adapt procedures and techniques for calibrating measurement devices, by applying knowledge of measurement science, mathematics, physics, chemistry, and electronics, sometimes under the direction of engineering staff. Determine measurement standard suitability for calibrating measurement devices. May perform preventive maintenance on equipment. May perform corrective actions to address identified calibration problems.


Median Wage
$67,820
Employed Nationally
17K
Openings / Year
1,500
Entry Education
Associate's degree
Job Zone
Zone 3: Medium Preparation

Also known as:

Calibration Engineer Calibration Specialist Calibration Technician Calibration Technologist Certified Calibration Technician

How Much Do Calibration Technologists and Technicians Make?

Most calibration technologists and technicians take home around $67,820 a year, about what a typical college graduate makes. Half earn somewhere between $56,380 and $92,080, so where you land depends a lot on employer, specialty and city. A solid living in most parts of the country. Source: BLS.

A wage on its own says nothing about whether the degree behind it pays for itself, which is a question of lifetime earnings set against the total cost of getting there.

$67,820
National Median (Annual)

Near the national median for college graduates.

$56K–$92K
Middle 50% Range

25th to 75th percentile. Most workers earn within this band.


Earnings Range

What Is the Job Outlook for Calibration Technologists and Technicians?

Through 2035 the BLS expects this field to change by +4.8%, meaning it is growing at about the same pace as everything else, so expect steady demand. Around 1,500 roles open up each year, which is the number that matters most if you are starting out. Source: BLS.

Growth rates are only meaningful next to other occupations, and the full list of careers with their projected growth puts this one in context.

↗ +4.8%
10-Year Growth (2025–2035)

About as fast as average.

1,500
Annual Openings

New positions plus replacements for retirees and career-changers.

17K
Currently Employed

Total US employment as of BLS May 2025.

Source: BLS Employment Projections 2025–2035 and Occupational Employment and Wage Statistics May 2025.

Where the Jobs Are

The five states below employ the most Calibration Technologists and Technicians professionals nationwide. State-level wages can differ significantly from the $67,820 national median. Research your specific market before committing to a program.

# State Jobs Median Wage vs. National
1 Texas 5,020 $74,100 +9.3%
2 California 1,250 $79,010 +16.5%
3 Indiana 810 $61,930 -8.7%
4 New York 800 $61,270 -9.7%
5 Ohio 740 $65,520 -3.4%

Source: BLS Occupational Employment and Wage Statistics, May 2025. Employment figures rounded. Read our methodology →

How to Get Here

To get hired here you will usually need a associate's degree. The 2 programs below are the most common routes in, ordered by how many people actually graduate from each one.

The next most common path is an Electrical/Electronic Engineering Technologies/Technicians program and the colleges offering it, which suits a different kind of applicant.

Associate's degree
Zone 3: Medium Preparation

A medium amount of preparation is required, often an associate degree, certificate program, or apprenticeship, plus some related experience.


Degree Programs That Lead Here

# Program Graduates/yr 4yr Median Colleges
1 Electromechanical Technologies/Technicians 10,996 $84,304 533
2 Electrical/Electronic Engineering Technologies/Technicians 8,331 $84,599 572

Top Colleges for Aspiring Calibration Technologists and Technicians

Colleges offering the degree programs that lead to this career, ranked by UCD Score. A strong program plus solid outcomes is a good place to begin your search.

# College UCD Score Net Price Salary 10yr
1 University of Michigan-Ann Arbor Ann Arbor, MI 91 $13,138 $83,648
2 California State University-Long Beach Long Beach, CA 90 $10,440 $64,403
3 Turtle Mountain College Belcourt, ND 88 $3,428 $32,079
4 Brazosport College Lake Jackson, TX 88 $4,732 $45,910
5 California State Polytechnic University-Pomona Pomona, CA 86 $11,531 $71,902
6 South Florida State College Avon Park, FL 86 $3,877 $39,990

Plan Your Path

Once you've sized up Calibration Technologists and Technicians, these tools turn the numbers into a plan. Estimate the real cost of a degree that leads here, weigh the long-term payoff, compare specific colleges side-by-side, and find programs that match your profile.

Calibration Technologists and Technicians Pros & Cons

The data on Calibration Technologists and Technicians shows 3 measurable strengths and 1 real trade-offs. All points are drawn from BLS wage data, employment projections, and IPEDS program completions.

PROS
  • Competitive salary $67,820 median wage puts this career near or above the national average for bachelor's degree holders.
  • Steady job outlook The BLS projects +4.8% growth through 2035, keeping pace with the national average. Demand is stable and annual openings remain consistent.
  • Accessible entry path The typical entry requirement is a associate's degree, lower than many comparable-paying careers. This creates a shorter path from training to first paycheck.
CONS
  • Earnings and demand vary significantly by region National figures for Calibration Technologists and Technicians mask real geographic variation. High-demand metros can pay 20% or more above the national median while lower-cost or rural markets often fall well short. Where you work matters nearly as much as your credentials.

Calibration Technologists and Technicians Frequently Asked Questions

How much do Calibration Technologists and Technicians professionals earn?
Around $67,820 a year for the typical worker, near the national median for full-time workers. The middle 50% of earners fall between $56,380 and $92,080. Treat the national figure as a starting point rather than a promise: employer size, industry and city all move it.
Is Calibration Technologists and Technicians a good career?
For people genuinely interested in the work, yes. At $67,820 median, with +4.8% projected growth through 2035, there is a real financial case and a stable market for new entrants. Compare program net price against local salary outcomes (not just the national median) before committing.
How do I become a Calibration Technologists and Technicians?
Most Calibration Technologists and Technicians positions require a associate's degree as the minimum credential. a medium amount of preparation is required, often an associate degree, certificate program, or apprenticeship, plus some related experience. Programs like Electromechanical Technologies/Technicians are common starting points.
What is the job outlook for Calibration Technologists and Technicians?
Employment is projected to change by +4.8% through 2035, about as fast as average compared with other occupations. Around 1,500 roles open each year once you count people retiring and moving on, which matters more to someone starting out than the growth rate does. 17K people do this job nationwide today, so it is an established field rather than a niche one. Source: BLS May 2025.

Continue Exploring

Browse our full directory: every college, major, program, and career we track, all built from verified government data.